For a long time graffiti has formed part of the social fabric of the urban setting. People apply this pigment on different surfaces because of different reasons. Whether the substance has any aesthetic value is a matter of contention that has been debated without reaching any useful consensus. In most jurisdictions, the application of graffiti onto surfaces and structures has been made illegal. Those found perpetrating the act are often fined heavily. A lot of investment has been made by governments to find effective methods of removing the substance. When in need of service providers for graffiti removal Annapolis offers one of the best locations to check out.
Various tools and methods can be used in removing graffiti, but the nature of surface often plays a role in the choice of technique to use. Water, duct mask, safety glasses, paint scraper, kitchen cleaner, spray bottles, trash bags, cotton paint rags, and aerosol solvent are some of the supplies needed for the job. While working, it is likely that various substances such as dust, solvents, and paints will splash off the surface into the eyes. As such, eyeglasses offer protection against such events.
Some of the surfaces from which graffiti may need to be removed include metal, wood, plastic, glass, and masonry surfaces. When working on a metal surface, the substance can be wiped using common paint thinners such as lacquer thinner, mineral spirits, or acetone. After removing using the paint thinners named above, the remnant can be removed using steel wool, sandpaper, or bronze wool.
On wooden surfaces, the method to use depends on whether or not the wood is weathered. Minerals spirits can be used on non-weathered wooden surfaces. Conversely, mineral spirits cannot be used on weathered wooden surfaces because they drive the pigment deeper into the wood.
The use of paint thinners is highly discouraged on plastic surfaces. Instead, one should use light, penetrating oils. Good examples of such oils are Three-in-One and WD-40. Paint thinners are discouraged because they may cause permanent damage to the plastic surface. Mostly they will cause clouding if the plastic is a clear one. They may also cause permanent tackiness. The use of ultra-fine bronze or steel wool may work.
In a situation where the pigment cannot be removed easily, it would be better to just paint over it using ordinary paint. The choice of the paint should be such that the color perfectly eclipses the pigment. One may need to paint several coatings so that the pigment is completely hidden. The level of efficiency of paint varies from one surface to another. Wood, masonry, and plastic are some of the surface painting over works best on.
Pressure washing is another method that one can use on a variety of surfaces. This method works well on masonry, metal, wood, and plastic surfaces. One should regulate the pressure carefully to avoid damaging the surface being cleaned.
Different surfaces need the pressure washer to be working at a given pressure level to avoid being damaged. Pressure limits for each surface should be printed on the user guide accompanying the washer. If not, the pressure should be tried on a small part of the surface first before extending to the whole surface.
Various tools and methods can be used in removing graffiti, but the nature of surface often plays a role in the choice of technique to use. Water, duct mask, safety glasses, paint scraper, kitchen cleaner, spray bottles, trash bags, cotton paint rags, and aerosol solvent are some of the supplies needed for the job. While working, it is likely that various substances such as dust, solvents, and paints will splash off the surface into the eyes. As such, eyeglasses offer protection against such events.
Some of the surfaces from which graffiti may need to be removed include metal, wood, plastic, glass, and masonry surfaces. When working on a metal surface, the substance can be wiped using common paint thinners such as lacquer thinner, mineral spirits, or acetone. After removing using the paint thinners named above, the remnant can be removed using steel wool, sandpaper, or bronze wool.
On wooden surfaces, the method to use depends on whether or not the wood is weathered. Minerals spirits can be used on non-weathered wooden surfaces. Conversely, mineral spirits cannot be used on weathered wooden surfaces because they drive the pigment deeper into the wood.
The use of paint thinners is highly discouraged on plastic surfaces. Instead, one should use light, penetrating oils. Good examples of such oils are Three-in-One and WD-40. Paint thinners are discouraged because they may cause permanent damage to the plastic surface. Mostly they will cause clouding if the plastic is a clear one. They may also cause permanent tackiness. The use of ultra-fine bronze or steel wool may work.
In a situation where the pigment cannot be removed easily, it would be better to just paint over it using ordinary paint. The choice of the paint should be such that the color perfectly eclipses the pigment. One may need to paint several coatings so that the pigment is completely hidden. The level of efficiency of paint varies from one surface to another. Wood, masonry, and plastic are some of the surface painting over works best on.
Pressure washing is another method that one can use on a variety of surfaces. This method works well on masonry, metal, wood, and plastic surfaces. One should regulate the pressure carefully to avoid damaging the surface being cleaned.
Different surfaces need the pressure washer to be working at a given pressure level to avoid being damaged. Pressure limits for each surface should be printed on the user guide accompanying the washer. If not, the pressure should be tried on a small part of the surface first before extending to the whole surface.
About the Author:
When you are looking for information about graffiti removal Annapolis locals can visit our web pages here today. More details are available at http://midatlanticpowerwashing.com now.