Is Installing A Shower Head Water Saver A Good Move?

By Rebecca Gibson


Every household around the country wants to cut on the amount of liquids they use. Shower head water saver has played a crucial role in actualizing this. Despite the reduced usage during a bath, one is still able to have a comfortable bath. Although a simple technology, it has proven to be important.

How these faucets work to save this commodity is simple. It can either use an air pressure system or a smaller compact head. The device has tiny holes which reduce the amount of liquid that goes through it. This will mean a lower volume will be released per unit time when compared with the traditional showers. Alternatively, a pressure system can be used. It will spray out a pressurized sprinkle which produces the same feel for less liquid.

This device has a lot of advantages. Due to the controlled usage, it plays a significant role in saving. Unlike the standard shower head which uses three to eight gallons per minute, it uses 2.5 per minute. This can cut your bill by up to 50%. You will not have to worry about kids and people who have a habit of taking long in the bathroom.

With the scarce supply of quality waters, these shower heads have environmental advantages. The shortage menace is so real that most people depend on the supplies by the municipal regardless of its quality. It is naturally our responsibility to ensure the proper use of these limited resources. I would advise the application of the device for the actualization of this.

If you have not yet installed this bathroom faucet, these guidelines can help you with buying. First and foremost, makes sure you check the flow rate of the device. The preferred discharge rate is 2.5 gallons per minute. Anything beyond this will not give optimum results. Knowing what design you want to work with is also vital. You can choose between an aerated and non-aerated but always go for what you prefer. Otherwise, both models are efficient. Do not just buy from anyone, always go for a quality brand.

The cons of using the appliance also exist. An increase in the power bill is among them. Since the pressurized sprinkle is delivered in smaller droplets, they easily cool down. Therefore, for an individual to enjoy the comfortable temperatures, he will have to increase its temperature. Up to 10% increased power consumption can go into heating. Another downside is scalding. Due to small volume discharge, an unexpected decrease in the cold water pressure can make the shower to produce a scalding sprinkle. This can happen when flushing a toilet. The problem can, however, be prevented by the installation of pressure balancing valves or an anti-scald valve.

If the family is supplied with has very high mineral components, the low flow head can be easily clogged. This is as a result of deposition of minerals on the delivery holes. The situation reduces the efficiency of the appliance.

In conclusion, the installation of these devices in our bathrooms can go an extra mile in reduction of its use and consequently the bill too. Despite the few disadvantages, I would go for it as it also promotes conservation by preserving this commodity with plays a crucial role in the eco system.




About the Author: